Washing Train RE-SP Standad, RE-SPC Continuous

Description

Catinet automatic carpet washing machines are designed to deliver exceptional washing quality compared to traditional methods, while reducing the need for labour and handling. They combine several cleaning processes in a single line: detergent application, deep brushing with adjustable pressure, rinsing and automatic rolling of the carpet at the end of the cycle. The carpet is transported on a belt during the four washing stages and, in practice, the entire process can be handled efficiently by a single operator in the laundry. The use of high-quality materials and an integrated water recirculation system (or optional depending on the model) contribute to minimizing operating costs and environmental impact.

Higher quality of finish, new system that improves the finish of carpets by eliminating the Z-marking, in the Continuous series (SPC).

Brush construction eliminates wrinkles of carpet during the washing process.

Pre-spin system Exclusive Catinet system that removes 60% of the water from the carpet or rug before the final rolling, facilitating handling and spinning.

100% AISI 304 stainless steel structure, which guarantees high durability, maximum hygiene and excellent resistance to corrosion in intensive environments.

Maximum operational safety, designed to meet the highest standards of occupational and industrial safety and protect the operator.

High performance and reliability, ensuring continuous operation and always homogeneous draining results.

Reduced electricity and water consumption, with savings of more than 20%, optimizing energy, with the water recovery system now 50% reducing the environmental impact.

Minimal maintenance, which reduces downtime and service costs over the entire service life.

Lower total cost of ownership (TCO) thanks to the combination of energy efficiency, low maintenance and long durability of the Components

Transport the carpet on a conveyor belt through four integrated stages: detergent application, brushing, rinsing and final rolling.

Apply the detergent in the first phase using a pump that takes it directly from the drum, with adjustable dosage according to the type of carpet and the degree of dirt.

Perform intense cleaning in the second phase using rotating brushes mounted on a trolley that travels across the width of the carpet, ensuring uniform brushing.

Regulate the pressure of the brushes by means of a compressed air system (from 0 to 60 kg on the trolley), allowing you to safely clean delicate, very dirty and long-haired shaggy carpets.

Change the direction of rotation of the brushes to prevent the fibers from twisting in one direction and improve the final appearance of the hair.

Rinse the carpet in the third stage with two high-pressure mobile ramps that remove detergent residues.

Automatically roll the carpet in the fourth phase, leaving it ready to be inserted directly into the centrifuge or wringing machine.

Allow the simultaneous washing of several carpets (depending on type and width), increasing productivity in professional plants.

Adjust key parameters: brush pressure, brush rotation speed, detergent quantity, carpet feed speed and forward direction (forward/backward), plus a feed stop function to treat fringes and heavily soiled areas.

Reuse up to approximately 60% of the water after filtration for the brushing phase, thanks to the recirculation and filtering system included with the machine.

Ensure long service intervals, with a brush life of up to 25,000 rugs under normal working conditions.

Adequate power supply according to the machine configuration, to power the spin motor and automatic control system.

Water intake to feed the washing and rinsing circuits.

Connection to the sewerage network for the evacuation of the water extracted during the draining process.

Compressed air supply for the operation of the pneumatic elements associated with the locking or safety system (depending on the model).

Level and resistant support surface, without the need for special foundations, as there are no vibrations.

Technical data	RE Simple	RE 3006SP	RE 409 SP	RE 312 SPC	RE 418 SPC	RE 436 SPC
Touch screen control	Yes	Yes	Yes	Yes	Yes	Yes
Connected machine	Yes	Yes	Yes	Yes	Yes	Yes
Automatic introduction carpet	Yes	Yes	Yes	Yes	Yes	Yes
Maximun Carpet width	3.2 m	3.2 m	4.5 m	3.2 m	4.5 m	4.5 m
Washing	Yes	Yes	Yes	Yes	Yes	Yes
Continuous System	No	No	No	Yes	Yes	Yes
Number of brushes	3	6	9	12	18	36
Maximum brush extension	12	12	18	12	18	36
Speed of brush rotation (max)	300 rpm	300 rpm	300 rpm	300 rpm	300 rpm	300 rpm
Productivity of washing	30 m²/h	120 m²/h	90 m²/h	120 m²/h	180 m²/h	360 m²/h
Number of shampoo pumps	1	1	2	2	2	2
Speed of carpet (m/min.)	0,2 – 1	0,2 – 1	0,5 – 2	0,5 – 2	0,5 – 2	0,5 – 3
Water recovery	OPTIONAL	Yes	Yes	NO	Yes	Yes
Water tank Recirculation	OPTIONAL	Yes	Yes	NO	Yes	Yes
Water filter Recirculation	OPTIONAL	OPTIONAL	Yes	NO	Yes	Yes
Pre-centrifuged	OPTIONAL	Yes	Yes	Yes	Yes	Yes
Automatic carpet rolling up	No	No	Yes	Yes	Yes	Yes
Voltage (V)	2 x 220V	2 x 220V	3 x 400V	3 x 400V	3 x 400V	3 x 400V
Power supply	3 kW	4 kW	6.75 kW	10.5kW	12.5kW	19.5kW
Water supply	1/2”	1/2”	3/4″	3/4″	3/4″	3/4″
Average time of cleaning process (carpet 4 m2)	12 min	6 min	2 min	2 min	2 min	2 min
Electricity usage (kWh/m2)	0.10 kWh/m²	0.07 kWh/m²	0.06 kWh/m²	0.12 kWh/m²	0.25 kWh/m²	0.25 kWh/m²
Dimensions Long	3.7 m	3.7 m	5.4 m	4.4 m	5.4 m	5.4 m
Dimensions Wide	1.2 m	1.2 m	2.4 m	2.4 m	2.4 m	2.4 m
Dimensions Height	1.7 m	1.7 m	2.1 m	2.1 m	2.1 m	2.1 m
Weight	700 Kg	900 Kg	1,800 Kg	1,650 Kg	1,870 Kg	3,314 Kg
Material	Stainless Steel 304	Stainless Steel 304	Stainless Steel 304	Stainless Steel 304	Stainless Steel 304	Stainless Steel 304

Request a quote

Other machines

Download